Mailbox Repairs in Saint Paul, TX

Thank you for visiting Mailbox Repairman. If you are searching for mailbox repair handyman in Saint Paul you have found the right place. Mailbox Repairman is a highly respected Texas masonry company specializing on everything from mailbox leaning repair to mailbox replacement brick enclosure. Our stucco mailbox repair experts have years of experience in the field, and they are always happy to assist. We‘ve worked with thousands of customers not only in Saint Paul but in Dallas County and Collin County, Texas.

People say that evrrything is big in Texas and brick mailboxes in Saint Paul are no different. However, you may face a challenge when searching for a the best brick mailbox installation company in Saint Paul. That is because there is no shortage of stucco mailboxes companies in this area. But, you can’t go wrong with Mailbox Repairman we‘re an established contractor that has been serving families and individulas throughout Dallas and Collin County for over two decades and have hundreds of happy clients to attest to that. It does not matter whether you are doing brick mailbox repair, stone mailbox repair, stucco mailbox repair, or complete mailbox installation, the same level of service will be provided. Mailbox Repairman has formulated a revolutionary method to help clients easily estimate how much their mailbox repair will cost. We are one of the few mailbox repair services showing initiative and innovation in the stucco mailbox market in Saint Paul.

Post Realted to Mailbox Repairs in Saint Paul, Texas

Stucco Column Repair

It is always very important to have knowledge of stucco column repair, as this would help you make the best possible decisions when you want to fix your stucco mailbox. Usually, when stucco is installed very well, it can last for as long as possible, but when you start seeing cracks, know that it is time to repair it before the damage worsens.

So, in the coming paragraphs, we will be delving deep into all you need to do regarding stucco mailbox repairs.

Stucco Materials

The first thing you have to consider is all the material that you will need to adequately fix the stucco cracks. Here is what you will need.

Bonding agent, preferably acrylic
Cement
Hydrated Lime
Damp Mason’s sand

The materials named above would be for the first coat. Then the materials for the second coat would be as follows

Aggregate sand for concrete
Acrylic bonding agent
Hydrated lime
Portland cement

Then the steps to make the stucco recipe are as follows

Mix the dry ingredients and blend them
Put bonding agent, add water, and mix until butter consistency
After you have added water, use it in less than 90 minutes, or it will start getting hard.

Precautions

As you do this, ensure that you take note of the weather very well, as extreme colds mess up stucco. Additionally, windy and dry weather would suck out the water from the mix, making it hard to reach that perfect consistency. Thus, the best temp is a nighttime temperature above 40 degrees.

Also, note that you are working with caustic alkalis, which can cause burns. Thus, ensure to wear gloves and mix the recipe with tools and never your actual hands. In case of emergence, keep a bucket of clean water to dilute and remove splashes of the mixture if it touches your skin.

Remember that when you are repairing old stucco, no matter what you do, the new stucco will not match the color of the old stucco column. So it is always best to add a coat to finish it off. You could use concrete paint, lime washes, or mineral paints. Whatever one you use ensures it is tolerant to alkaline and is water vapor permeable.

Steps to fix the stucco column

After you have adhered to the precautions above and made the stucco recipe, follow these steps.

Remove the old stucco from the mailbox. You can use a hammer or chisel and be sure not to destroy the underlying structure.
Chip the edges away.
Use builder’s paper to cover the exposed underlying structures. Use nails to hold it in place.
Put the mesh on top of the paper.
Mix the stucco. Make sure you do this as close as possible to the 4th step, so the mix doesn’t dry up.
Put the stucco by slinging it towards the exposed mesh
Scratch the first stucco coat and put plastic tape over it. This is to improve strength with the second coat.
After seven days, remove the tape and put on the second coat. Add plastic tape over it and wait for three days.
After three days, remove the tap and add the final coat.
Wait for the coat to dry up and paint it. Then your stucco column repair is complete.