Mailbox Replacement in Duncanville, Texas

One of the major advantages of having a stucco mailbox is that it can be designed any way you want. There is this freedom that comes with mailbox painting, designing, and styling. Basically, your chances are unlimited, and you can do whatever you want!

In case you don’t know what to do, we will help you with everything you need to know to adequately paint your mailbox. As you know, getting your home to look as good as it can is very important.

Here are the steps.

1.  Pick the right paint

If you are painting exterior surfaces, it is always recommended that you use latex paints because they have higher durability and can last longer. They also give more flexibility and fade resistance.

Note that for stucco exteriors, before painting, always prime the surface first.

2.  Purchase the paint

It is not just enough to buy paint but to get the right amount. If it’s too much, you may waste it, but if it’s too little, you will waste time doing it. A good way to measure the right area of the surface and add 30% more.  Typically, 400 square feet will need 1 gallon of paint.

3.  Prepare the painting area

Since your stucco mailbox may be near plants or address numbers and it would be best to remove them or cover them to prevent any form of spillage. It is also advisable to cover the ground, so there is no spillage on the floor. Additionally, think about your neighbors, too, and be sure not to get paint on their property.

Also, remove any dirt from the area by applying water pressure all over it. And fill cracks up. Please make sure the cracks dry first before you come to repaint it.

4.  Paint

After you have prepared the area, the next thing to do is to paint that area. The best equipment to use is painting tools such as paint rollers. This way, the area is covered completely. You could also use brushes such as professional-grade paint brushes that have wooden handles and synthetic bristles. These particular paint brushes would work very well for latex paints.

Additionally, buy different types of brushes for the job, such as small brushes for crevices and medium for cutting in, and large for general painting. You could also use spray, especially if you want to do designs, but you have to take note of your surroundings and cover yourself adequately to prevent your lungs from inhaling paint mist. Also, remember that you should prime the area first before painting.

5.  Cleaning up

After you have painted the area well, commence your clean-up immediately. Please do not wait for time to pass as it would be harder to clean paint off surfaces. Use running water to wash your roller and bushes. Then remove any painter’s tape and throw it away.

You are now ready to paint your stucco mailbox.

Conclusion

In stucco mailbox painting, remember to prepare the area, prime it, buy the right amount of paint and clean up the area after you are done.